Bolt-on body kits, flares, over fender and other body elements are an "easier" way to drastically change the presence of your vehicle.
We've made a complementary solution that helps you avoid ugly pop-rivets or screws which can back out. The ZSPEC Fastener solution for bolt on body kits (i.e. fits Liberty Walk, AIMGAIN, Z32 "PMZ"/PacMan Body Kit, CZP Zero, Rocket-Bunny etc...) includes:
- Sixty (60) Billet Colored Finish Washers
- Sixty (60) M5x20mm Stainless fasteners
- Sixty (60) M5 Stainless Rivet Nuts
- Sixty (60) M5 Silicone "Seat" Washers (to help protect your paint when installing)
We include Rivet Nuts with our kits - but DO NOT include the Rivet Nut installation tool. Note, you'll need a 6.8mm drill-bit to drill a hole for the rivet nuts to be installed. Be sure to TEST-install one Rivet Nut before drilling all holes!!
NOTE: As mentioned, this kit requires basic hand-tools for installation and Rivet Nut Tool if using Rivet Nuts (not included). Professional Installation Recommended.